PIPE SUPPORTS

Clamps for all reasons

- in polypropylene, polyamide, aluminium, santoprene shells or with rubber inserts and metal parts of zinc plated steel or stainless steel.

Complete range of Stauff pipe clamps for every tube, hose, pipe, and conduit clamping application.

Noise reducing
Shock absorbing
Vibration damping
Weld base or rail mount
Stackable for multi-tier

Standard Series - for diameters from 6mm to 102mm.

Heavy Series - for diameters from 6mm to 406mm.

Twin Series - for diameters from 6mm to 42mm.

Light Series single and Twin - for diameters from 6mm to 25.4mm.

DIAGNOSTIC EQUIPMENT

Test Points: Testequ 7.02 Mb

Stauff Flowtell: Stauff-Flowtel-Brochure 343.91 Kb

Webtec: Webster 2.68 Mb

Stauff-Test Analogue

The ideal, leak-free system for pressure and vacuum measurements without using spanners. Pressures from vacuum to 630 bar. Ideal for oil sampling. Test couplings available in a wide variety of connecting threads to suit most systems.

Stauff-test 20:	400 bar
Stauff-test 15:	630 bar
Stauff-test 12:	630 bar
Stauff-test 10:	400 bar (push-in)
Pressure Gauges:	63mm & 100mm
Test Hoses:	2mm & 4mm I.D. to any length with wide range of hose ends.

Stauff-Test Digital

Digital system gives great accuracy and is capable of capturing pressure spikes. Can measure and display two readings simultaneously including pressure, peak pressure, differential pressure, speed (RPM), temperature and flow depending on the sensor.

PPC 04 handheld unit with pressure transducers connecting to Stauff-Test couplings is powered by battery. The display gives instantaneous information and the output can also be sent to a related printer for permanent recording.

Pressures:	-1 to 630 bar.
Speeds:	20 to 10,000 rpm.
Temperatures:	-25 to +125°C.
Flows:	to 600 l/min.

Flow Measurement & Data Logging

A comprehensive range of flow indicators for fluids and gases plus a variety of flow meters and data loggers for fluids covers most requirements. Portable as well as computer-based test bench applications are included in the range. Flow rates from millilitres per minute through to thousands of litres per minute are able to be measured by the equipment. Turbine and gear type units are able to measure flows in a wide variety of fluids and related readouts/controllers give flexibility to system designers in volume measurement, dispensing and other related functions. Bi-directional measurements are possible with the Kracht gear blocks making positioning control easy.

Next >