HomeHydraulicsEquipment Hire • Tube Manipulation

Tube Manipulation


Stauff Bender STHB622 Manual Tube Bender


  • Manual tube bending kit, vice mounted


  • 9 roller sizes
    • 6/8, 10, 12, 14, 15, 16, 18, 20 and 22mm
    • 1/4", 3/8", 1/2", 5/16", 3/4"
  • Angle graduations on dies
  • 5kg, including metal case




Mates up to a standard 24˚ taper in the DIN body, providing a better solution to standard cutting ring attachments.

Tube sizes from 6mm x 1mm, up to 38mm x 5 mm heavy and 42mm x 3mm light

Protection against over tightening




Tubobend 648 with Operator


The Tubobend 648 can be hired from MHS, ideal for on-site tube bending requirements. We can also offer a trained technician to operate the machinery during your hire period.


  • 50.8mm maximum tube diameter
  • Standard tooling 2D radius 145mm maximum bending radius
  • 20˚/second maximum bending speed
  • ±0.2% positioning accuracy


  • Dimensions (LxWxH) 2350 x 750 x 1200 mm
  • 600kg


  • 415V, 50Hz, 3 phase power

Stauff Press


The Stauff-Press flare & pre-assembly unit is designed for a leak free assembly of flaring or cutting ring fittings on tube or hose ends with a minimum amount of training needed for operators.

  • Low, medium and high-pressure hoses, even for special applications
  • Wide range of fittings, couplings, adaptors and hose ends
  • Ready-made hose assemblies
  • Stationary and portable hose crimping machines and equipment
  • Tooling is also available for flaring and pre-setting
  • Universally usable for pre-setting metric cutting ring assembly and flaring inch tubes.
  • Suitable for all tube/pipe diameters from 6 to 42 mm, and 1/4" to 1 1/2" O.D.
  • Absolute leakage-free assembly due to accurate pressure adjustment.
  • Considerable reduction of times and cost for assembly.
  • Short set-up times when changing the tube/pipe diameter or the fitting type.